Power Your Equipment with the StellarMate Pro Astrophotography Controller!
Now with Double the Storage!
Instead of just 128GB, this StellarMate Pro Astrophotography Controller houses 256GB of internal storage!
The StellarMate Pro is an advanced observatory-class astrophotography controller powered by Open Source technology. This powerful astronomy command center from StellarMate is compatible with a wide selection of astronomy equipment. The StellarMate Pro (SM Pro) provides a complete astrophotography solution and comes preloaded with all of the software and drivers that you need to operate and power your astronomy gear.
The SM Pro offers comprehensive power distribution capabilities and includes a built-in GPS/GLONASS receiver for highly accurate location and time services which result in the reliable operations of your equipment, no matter where you are. Equipped with 256GB of Class 10 MicroSD storage and 8GB of memory, you will experience both high transfer speed and lots of storage for your images. The StellarMate is based on years of field research by both amateur and professional astronomers from around the world.
StellarMate Pro Provides Complete Control of the Imaging Process!
Are you looking for a way to control your camera, mount, filter wheel, electronic focuser or DSLR from your smartphone or tablet? StellarMate Pro offers complete control of everything from your observatory and dome to polar alignment, auto guiding, robotic operation, image processing and more. Just connect your equipment to StellarMate Pro and control them from anywhere at any time! Check out just some of the features of the amazing StellarMate Pro below:
WiFi and HotSpot Capabilties
The passive GPS and WiFi antennas of the StellarMate Pro are optimized to provide high gain even in noisy environments. Reliable communication between your SM Pro controller and your smart device or PC/Mac is critical for the operation of the unit. StellarMate Pro is smart about its WiFi connections! As long as you are near enough to connect to your own WiFi network, StellarMate Pro will utilize that connection, but once you are away from your WiFi, StellarMate Pro automatically switches to HotSpot mode and uses its own dual-band WiFi so you never lose connectivity!
Real Time Live Stacking
With StellarMate Pro and Ekos software, you can toggle Live Stacking while imaging right from your iOS/Android tablet. Watch in real time as more frames are added, increasing the signal to noise ratio. See the difference as fully automated background removal and contrast adjustments take place on the fly!
Connecting to Your StellarMate Pro
StellarMate has designed the StellarMate Pro control units with three different methods to connect and control your SM Pro unit. First, the StellarMate Pro is a mini computer, meaning you can operate your unit by connecting a monitor, using an HDMI cord, and a mouse/keyboard directly to the body of the StellarMate. While possible, this method is generally not recommended since the StellarMate is usually mounted on the telescope. The second method is to operate the StellarMate Pro remotely using the External GPS, WiFi antennas, and the StellarMate app on your smartphone or tablet. The app is compatible with both Android and iOS devices. StellarMate recommends using a tablet or iPad with a screen size of 10″ or more to get the best experience. The third way to operate you StellarMate Pro control unit is to connect it to your Wondows, Mac, or Linux computer using a WiFi, LAN, or WAN connection. Once connected, you can operate it through the Ekos astrophotography tool that includes a mosaic planner and scheduler function.
Power and Port Options
The body of the StellarMate Pro includes several different connection ports so you can power a wide variety of user-supplied accessories. It can power up to four 12V DC devices, two 12V Dew Heaters, and one adjustable voltage output ranging from 3-9V. More specifically, the included ports are as follows: four 12VDC Outputs, two dew heaters, one 3-9VDC variable voltage output, fourUSB3.0 ports, and two USB2.0 ports. There is a multi-purpose AUX port designed to support environmental sensors and future accessories, including observatory relay controls. With a dedicated stepper controller capable of commanding up to NMEA 17 stepper motors, you can directly control many focuser stepper motors. Please Note: To power all connected devices, you will need a 12V @10A DC regulated power supply (not included).
Recommended Accessories
As mentioned above, you will need a 12V @ 10A DC regulated power supply. This is not included, but you can purchase the power supply separately. It is also suggested that you purchase the Ikarus Universal Losmandy/Vixen Adapter and StellarMate Pro Temperature and Humidity Sensor separately.
what our customer say this product:
| 5 star | 100% | |
| 4 star | 0% | |
| 3 star | 0% | |
| 2 star | 0% | |
| 1 star | 0% |
Only logged in customers who have purchased this product may leave a review.
Related products
Solar Filters
Solar Filters
Solar Filters
Solar Filters
Telescope-Solar Filters-AstroZap Visual Baader Solar Filter for 269 mm – 276 mm OD Telescopes
Solar Filters
Telescope-Solar Filters-AstroZap Visual Baader Solar Filter for 184 mm – 194 mm OD Telescopes
Solar Filters
Solar Filters
Telescope-Solar Filters-AstroZap Visual Baader Solar Filter for 215 mm – 225 mm OD Telescopes
Solar Filters
David P. Verified Buyer –
I came from a popular competitor project but wanted broader hardware support so I swapped out the easy solution for the Stellarmate Pro. I was expecting a learning curve but I was not expecting THIS learning curve. Wow! I had at least 3 nights of just tinkering before I could even capture lights again. There are endless options, but you have to kn
ow what and how to configure them. There were a few things that I wish I knew going in. For example: if you’re using a mono camera with filters and a auto-focuser, get your focus reasonably close, go to the focus tab, open the filter settings and click “Build Offsets”. That will get you baseline focus positions for every filter. From there the focuser will work. If you don’t, the focuser will probably fail to converge, regardless of your settings. There is no baseline configuration or guide to get you started, though.
Once you get it configured, however, it is incredibly powerful, configurable, and has been quite stable (for me). It is amazing to set a target and have it take photos all night, and then automatically run all the calibration frames when it is done. (I don’t have to mess with capturing darks and dark flats in the morning anymore.). The old “easy” computer couldn’t do that because light boxes and dust caps weren’t supported. I also learned not to use the app. Configuring over VNC is much more usable. Once everything is configured, the app is probably fine, but don’t use it initially.
Stellarmate support is also incredible.
My Rig (without brands): 100mm refractor, EQMod mount, mono camera, guide scope with camera, filter wheel, focuser, dew strips, and auto dust cap/ light box.